Molding (also known as press forming or compression molding) is a process in which a powdery, granular or fibrous plastic is placed in a mold cavity at a molding temperature, and then closed and pressurized to form and solidify. Molding can be used for both thermosets, thermoplastics and rubber materials.
Mainly used as structural parts, connectors, guards and electrical insulation. Widely used in industrial, agricultural, transportation, electrical, chemical, construction, machinery and other fields. Due to the reliable quality of molded products, they have also been applied in weapons, aircraft, missiles and satellites.
Advantages
(1) The loss of raw materials is small and does not cause excessive loss (usually 2% to 5% of the quality of the product).
(2) The internal stress of the product is very low, and the warpage deformation is also small, and the mechanical properties are relatively stable.
(3) The wear of the cavity is small, and the maintenance cost of the mold is low.
(4) The cost of the molding equipment is low, the mold structure is relatively simple, and the manufacturing cost is usually lower than that of the injection mold or the transfer molding mold.
(5) It is possible to form a large flat product, and the size of the product which can be molded by molding is determined only by the clamping force of the existing molding machine and the size of the template.
(6) The shrinkage of the product is small and the repeatability is good.
(7) It is possible to place a mold having a large number of cavities on a given template, and the productivity is high.
You can find Plastic Molded Parts in ABERY from the website, which is not only an exporter and producer, but also a molder and mill. Welcome customers to visit our factory. If you are interested in us, you can contact us directly or leave a message.
First Prev 12 Next Last 1/2