Add: RM101&201, BLD. 3TH, No.2, lane 6th, Laokeng Ind. Zone, Kengzi, Pingshan New District, Shenzhen City, China
What are injection molded plastics? Essentially, they are the product of an injection molding process in which melted plastic is forced into a mold cavity. Once the plastic has cooled, the object is released and then the process begins all over again.
There are three main parts in an injection molded plastics machine: the mold, the clamping unit and the injection unit. It is the clamping unit that holds the mold together during the plastic injection and the cooling process.
Plastic material in the form of small pellets are fed into the injection unit and then heated to a molten stage (transforming from a solid state to a liquid). After reaching the right temperature, the hot molten plastic is forced into the mold. Either a screw or a ram controls the pressure and speed of this phase of the injection molded plastics process. The short phase between the injection and the cooling of the object into its solid form is referred to as the "dwelling" phase. This step ensures that the mold cavities are completely filled before cooling begins.
What are the benefits of injection molded plastics? This process allows companies to produce products of more complex and intricate shapes that would be too difficult or costly to machine. The injection molded plastics process also allows many parts to be created at the same time with the same mold. Other advantages include high production rates, low labor costs and high repeat tolerance, plus there is very little need to do anything to finish the part after it is molded. The unused plastic pellets and runners can also be recycled for future molds so there is virtually no waste.
There are some disadvantages too, primarily the expensive investment in machine costs. Also, there can be some limitation in the design of the parts because molding considerations must be kept in mind.
Related Industry Knowledge
- Injection molding machine
- Injection mold construction
- Plastic model
- Multi-material injection molding
- Liquid Injection Molding
- Hot runner
- What is the Plastics Industry?
- What is Mold?
- What's rapid injection molding
- Mold Flow Analysis
- Double injection molding
- International protect rating IP-68
- Overmolding products
- Reverse engineering-rapid manufactu...
- EXPERT ANALYTICAL SERVICE
- Coordinated control system
- Plastics identification and classif...
- What is Polypropylene (PP), and Wha...
- What are the Characteristics of Pol...